If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the camera
management interface.
3)
Click
Add
to add the camera.
For the successfull
y
added IP cameras, the Security status shows the security level of the password of camera:
strong password, weak password and risk password.
2.5.3
Editing the Connected IP Cameras
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1.
Click the
icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 2. 15
Edit the Parameters
Channel Port:
If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
2.
Click
OK
to save the settings and exit the editing interface.
To edit advanced parameters:
1.
Drag the horizontal scroll bar to the right side and click the
icon.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
