Figure 2. 4
Configure Signal Input Type
The AHD signal input is supported by the DVR.
Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04…, and the two
channels in the same group must be connected with the same type of video source, i.e., the analog or
HD-TVI or AHD video input.
In the live view interface, when there is no video signal of the analog channel, the corresponding connectable
video signal type message can be displayed on the screen.
2.3.2
Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the device has loaded.
Figure 2. 5
Start Wizard Interface
Operating the Setup Wizard:
1.
The Start Wizard can walk you through some important settings of the device. If you don’t want to use the
Start Wizard at that moment, click
Exit
. You can also choose to use the Start Wizard next time by leaving
the “Start wizard when device starts?” checkbox checked.
2.
Click Next to enter the date and time settings window.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
