LSR TiWi-uB1, User Manual

Page: 16 / 26

TiWi-uB1 Module
EM BOARD USER GUIDE
The information in this document is subject to change without notice.
330-0134-R1.5
Copyright © 2013-2017 LSR Page 16 of 26
5 Application Development
5.1 Overview
The TiWi-uB1 EM Board has been designed to work either as a standalone development platform or to
be used in combination with one of TI various development platforms. This flexible design platform
allows the user to take advantage of the sample applications provided by LSR as well as those provided
by TI for the CC2541 SOC.
LSR’s Design Services team can be contracted to assist customers with application -specific software or
hardware development for TiWi-uB1 applications.
For an overview of development platforms and software examples see LSR Wireless Products or TI
CC2541 Bluetooth .
5.2 Development Tools
5.2.1 LSR TiWi-uB1 EM Board Stand Alone Application
The LSR development kit demonstrates the stand-alone capability of the TiWi-uB1 EM development
board and connectivity to a Bluetooth® BLE enabled smartphone device. It provides a platform to show
the capability of Bluetooth® BLE for simple remote control of devices and low data rate remote data
collection and reporting.
LSRs TiWi-uB1 development kit hardware, sample firmware and iPhone Application allow the user to:
•
Monitor temperature of the onboard temperature sensor U2
•
Monitor battery voltage
•
Monitor RSSI of data transmission from the TiWi-uB1 module to the iPhone
•
Monitor the status of the onboard pushbutton switch S1
•
Toggle the user defined LEDs 1A and 1B on and off
•
Track RF statistics such as number of BLE packets sent and received
Hardware required for the LSR Standalone evaluation application includes:
•
TiWi-uB1 EM Board with coin cell battery ( Figure 7 )
Figure 7
TiWi-uB1 EM Board
TI CC Debugger ( Figure 8 )
•
Bluetooth® 4.0 enabled iOS devices such as iPhone 4s or later, iPod Touch with LSR application
running ( Figure 9 )