Safety Instruction
Before using the product, please read and follow the instructions of this manual carefully, and refer
to relevant national and international safety regulations.
∆Attention
Please do not disassemble or modify the Lidar privately. If you need special instructions, please
consult the technical support staff of LeiShen Intelligent.
∆Laser Safety Level
The laser safety of this product meets the following standards:
● IEC 60825-1:2014
● 21 CFR 1040.10 and 1040.11 standards, except for the deviations (IEC 60825-1, third edition)
stated in the Laser Notice No. 56 issued on May 8, 2019. Please do not look directly at the
transmitting laser through magnifying devices (such as microscope, head-mounted magnifying glass,
or other forms of magnifying glasses).
Eye Safety
The product design complies with Class 1 human eye safety standards. However, to maximize self-
protection, please avoid looking directly at running products.
∆Safety Warning
In any case, if the product is suspected to have malfunctioned or been damaged, please stop using
it immediately to avoid injury or further product damage.
Housing
The product contains high-speed rotating parts, please do not operate unless the housing is fastened.
Do not use a product with damaged housing in case of irreparable losses. To avoid product
performance degradation, please do not touch the photomask with your hands.
Operation
This product is composed of metal and plastic, which contains precise circuit electronic components
and optical devices. Improper operations such as high temperature, drop, puncture or squeeze may
cause irreversible damage to the product.
Power Supply
Please use the connecting cable and matching connectors provided by LeiShen Intelligent to supply
power. Using cables or adapters that are damaged or do not meet the power supply requirements, or
