LSIS LSLV0055H100-4COFN, Manual

Page: 316 / 610

Learning Advanced Features
302
Code Description
100%).
OUT-06 AO1
Monitor
Monitors the analog output value. Displays the maximum output voltage as
a percentage (%) with 10 V as the standard.
5.47.2 Analog Pulse Output
Output item selection and pulse size adjustment can be made for the TO (Pulse Output)
terminal.
Group Code Name LCD Display Parameter
Setting
Setting Range Unit
OUT
61 Pulse output setting TO Mode 0 Frequency 0–15 -
62 Pulse output gain TO Gain 100.0
-1000.0–
1000.0
-
63 Pulse output bias TO Bias 1000.0 -100.0–100.0 -
64 Pulse output filter TO Filter 5 0–10000 -
65
Pulse output constant
output2
TO Const % 0.0 0.0–100.0 %
66 Pulse output monitor TO Monitor 0.0 0–1000.0 %
Analog Pulse Output Setting Details
Code Description
OUT-62 TO
Gain, OUT-63
TO Bias
Adjusts output value and offset. If frequency is selected as an output, it will
operate as shown below.
𝑇𝑂 =
𝐹𝑟𝑒𝑞𝑢𝑒𝑛𝑐𝑦
𝑀𝑎𝑥𝐹𝑟𝑒𝑞
× 𝑇𝑂 𝐺𝑎𝑖𝑛 + 𝑇𝑂 𝐵𝑖𝑎𝑠
The following graph illustrates that the pulse output (TO) changes depend
on OUT-62 (TO Gain) and OUT-63 (TO Bias) values. The Y-axis is an
analog output current (0–32 kHz), and X-axis is a % value of the output
item.
For example, if the maximum frequency set at DRV-20 (Max Freq) is 60 Hz
and present output frequency is 30 Hz, then the x-axis value on the next
graph is 50%.