LSIS H100, Operation Manual

Page: 164 / 610

Learning Advanced Features
150
Code Description
DRV-11 JOG
Frequency
Set the operation frequency.
DRV-12 JOG Acc
Time
Set the acceleration speed.
DRV-13 JOG Dec
Time
Set the deceleration speed.
If a signal is entered at the jog terminal while an FX operation command is on, the operation
frequency changes to the jog frequency and the jog operation begins.
5.2.2 Jog Operation 2-Forward/Reverse Jog by Multi-function
Terminal
For jog operation 1, an operation command must be entered to start operation, but while
using jog operation 2, a terminal that is set for a forward or reverse jog also starts an
operation. The priorities for frequency, Acc/Dec time and terminal block input during
operation in relation to other operating modes (Dwell, 3-wire, up/down, etc.) are identical to
jog operation 1. If a different operation command is entered during a jog operation, it is
ignored and the operation maintains the jog frequency.
Group Code Name LCD Display Parameter setting Setting Range Unit
DRV
11 Jog frequency
JOG
Frequency
10.00
0.00, Low Freq
–
High Freq
Hz
12
Jog operation
acceleration time JOG Acc
Time
20.00 0.00
–600.00
sec
13 Operation JOG Dec 30.00 0.00
–600.00
sec