LSIS G100, Operation Manual

Page: 92 / 343

Acc/Dec Time Based on Operation Frequency
– Setting Details
Code and
Features
Description
bA.08
Ramp T Mode
Set the parameter value to 1 (Delta Freq) to set Acc/Dec times based
on Maximum frequency.
Configuration Function
0 Max Freq
Set the Acc/Dec time based on maximum
frequency.
1 Delta Freq
Set the Acc/Dec time based on operating
frequency.
If Acc/Dec times are set to 5 seconds, and multiple frequency
references are used in the operation in 2 steps, at 10 Hz and 30 Hz, the
time to accelerate will be as follows.
4.8.3 Multi-step Acc/Dec Time Configuration
Acc/Dec times can be configured via a multi-function terminal by setting the ACC
(acceleration time) and dEC (deceleration time) codes in the Operation group.
Group Code Name Setting Setting Range Unit
Operatio
n
ACC Acceleration time 5.0 0.0
–600.0
sec
dEC Deceleration time 10.0 0.0
–600.0
sec
bA
70
–82
Multi-step
acceleration time
1
–7
0.0 0.0
–600.0
sec
71
–83
Multi-step
deceleration time
1
–7
0.0 0.0
–600.0
sec
In
65
–69
Px terminal
setting options
11 XCEL-L
0
–52
- 12 XCEL-M
49 XCEL-H
89
Multi-step
command delay
time
1 1
–5000
ms