LSIS G100, Operation Manual

Page: 177 / 343

5.28 Analog Output
An analog output terminal provides output of 0
–10 V voltage and 4–20 mA current.
5.28.1 Current Analog Output
An output size can be adjusted by selecting an output option at AO (Analog Output)
terminal.
Grou
p
Cod
e
Name Setting Setting Range Unit
OU
01 Analog output 1 item 0 Frequency 0
–15
-
02 Analog output 1 gain 100.0 -1000.0
–1000.0
%
03 Analog output 1 bias 0.0 -100.0
–100.0
%
04 Analog output 1 filter 5 0
–10000
ms
05
Analog constant
output1
0.0 0.0
–100.0
%
06
Analog output1
monitor
0.0 0.0
–1000.0
%
Voltage and Current Analog Output Setting Details
Code and
Features
Description
OU.01 AO1 Mode
Select a constant value for output.
Configuration Function
0 Frequency
Outputs operation frequency as a standard. 10 V
output is made from the frequency set at dr.20
(Max Freq).
1
Output
Current
10 V output is made from 200% of inverter rated
current (heavy load).
2
Output
Voltage
Sets the outputs based on the inverter output
voltage. 10 V output is made from a set voltage in
bA.15
(Rated V).
If 0 V is set in bA.15, 200 V/240 V/400 V models
output 10 V based on the actual input voltage (480
V).
3
DC Link
Volt
Outputs inverter DC link voltage as a standard.
Outputs 10 V when the DC link voltage is 410 Vdc
for 200 V models, and 820 Vdc for 400 V models.
4 Torque
Outputs the generated torque as a standard.
Outputs 10 V at 250% of motor rated torque.