Alpha-Log
–
User manual
LSI LASTEM SRL
INSTUM_03388
Page 39 / 116
3.3.2
Configuring ALIEM sensors not from the 3DOM sensor library
If the sensor is not in the library list, it is advisable to choose one from the list with similar characteristics and
then change its properties or create a new one.
1.
Press
[Add]
from
Measure List Panel
.
2.
Expand the sensor’s category (e.g.
“Level”) and select the first sensor
(5)
.
The program will display its features
(6)
.
3.
Scroll the list until you find the most
similar sensor.
4.
Once identified, press
[Ok]
to confirm
measurements.
Starting from new sensor (not from the sensors library):
1.
From
section
General
Parameters
, select
Measures
(1)
.
2.
Press
[New]
(2)
.
3.
As
Measure behaviour
select
Acquired sensor.
4.
Set the remaining items of the
General
tab.
5.
Set the items of
Parameters
and
Acquired
sensor
tabs.
ALIEM module is not producing any statistical elaboration. All elaborations are made by Alpha-Log
using the row data received by ALIEM module (§2.2.4.2).
3.3.3
Saving and uploading configuration to ALIEM
1.
In the 3DOM’s
Toolbar
, press
[Save]
to save the configuration; confirm Measures Order and then
Configuration State
by pressing
[Ok]
.
2.
Press the name of the newly created configuration with the right key of your mouse and select
Upload...
to send it to ALIEM.
3.
After sending the configuration, press
[Close]
in the
Communication
window.
5
6
1
2
