Power Point
User Manual
Page 2
1
Introduction
1.1
Overview
PowerPoint is a simple to use power distribution unit with a 3 phase mains input (single phase
input available) and either 6 or 12 single phase outputs depending upon the model.
Designed for applications wherever fixed or mobile power distribution is required, the PowerPoint
distribution rack offers a 4-pole mains input isolator switch with Neutral Disconnect as standard
and individual RCBO (RCD+MCB) per output channel. There are also 3 neon phase indicators to
show power input to the rack.
Output circuit rating can be specified as either 10A, 16A or 25 Amps and back panel options
include either Australian GPO, Socapex, PowerCon or Hard Wired Terminals, depending upon
the model.
1.2
Features
The PowerPoint Feature list includes:
•
A front panel mounted 4-pole mains input isolator switch with neutral disconnect as
standard provides easy access for quick isolation for the PowerPoint
•
Three neon indicators show state of input phase power. Easily visible from a distance
•
Twelve 10A, twelve 16A or six 25A output circuits
•
Residual Current circuit Breaker with Overcurrent protection (RCBO) devices for each
output circuit are used to combine protection against current overload and short circuits
and protection against earth leakage currents. Essentially, they protect connected loads
and prevent users from receiving a life threatening shock. Standard on all LSC power
products
•
The PowerPoint is at home as a 19" rackmount module in portable flight cases or touring
frames or permanently installed in equipment racks. Versatility plus for any situation!
•
Three phase operation
•
Single phase operation possible
•
Utilising the same prov
en mechanical chassis as LSC’s premier products such as the
APS power distribution unit, GEN VI and RED3 dimmers, the PowerPoint is built to the
same exacting standards ensuring great consistent performance when you need it, time
after time.
2
Front Panel
12 channel PowerPoint
See section 4 for rear panel options.
Output Load RCBO’s
Main Input Isolator
Input phase
presence indicators
Input phase labels