![background image](http://html1.mh-extra.com/html/lsc/mantra-lite/mantra-lite_quick-start-manual_1943904018.webp)
Mantra Lite
Quick Start Guide
Page 18
•
Repeated taps of the [
Page
] button will step
through the 10 pages of memory.
•
To switch
directly
to a page number; HOLD
[
Page
] and
TAP a red fader button [
1
to
10]
.
The current page number is shown in the top left corner of the
“Home” screen and the contents of the red playback faders are
shown along the bottom.
17
Playback
To playback a recorded cue, fade up the Red Playback Master
to full and fade up the Red Playback fader where you recorded
the cue (remember to select the correct page). You might want
to fade down the Yellow master (or all of the yellow fixture
faders) after you bring up the Red playback, so that you only
see the recorded look on the output.
Different looks can be recorded in different cues so that you can
easily change the entire look on stage by only using the Red
Playbacks.
Unlike the Yellow Fixture faders that only control intensity, the
Red Playback faders control all of the attributes of the fixture
that have been recorded in the cue. This allows you to crossfade
from one Playback to another with a smooth transition of
intensity, colour and position. See Latest Takes Precedence
(LTP) below.
17.1
Cue-lists
If a Red Playback contains a cue-list you can crossfade to the
next cue in the list by tapping its playback button (below its
fader). The crossfade uses the
“fade in” and “fade out” times in
the cues. See section 18.
Every cue in a cue-list can contain a
“Link Time” (0.1 seconds
to 60 minutes) or
“Link Time” can be set to “None”.
•
If a cue in a cue-list contains a link time, then when the
cue is played, the link time starts counting down. When
the time expires the next cue in the cue-list is
automatically played.