LS SV-iG5H Series, Manual, Page: 94 / 226

Basic Functions
80
Operating command via FX, RX terminal 2 7.3.3
Group Code Parameter Name Setting Range Default Unit
Drive group drv [Drive mode] 2 0 - 4 1
I/O group
I17
[Multi-function input
terminal P1 define]
0 0 - 30 0
I18
[Multi-function input
terminal P2 define]
1 0 - 30 1
Set the drv to 2.

Set I17 and I18 to 0 and 1 to use P1 and P2 as FX and RX terminals.

FX: Operating command setting. Motor runs in forward direction when RX terminal (P2)

is OFF.
RX: Direction of motor rotation select. Motor runs in reverse direction when RX terminal

(P2) is ON.
Operating command via RS485 communication 7.3.4
Group Code Parameter Name Setting Range Default Unit
Drive group drv [Drive mode] 3 0 - 4 1
I/O group
I59
[Communication protocol
select]
- 0 - 1 0
I60 [Inverter number] - 1 - 250 1
I61 [Baud rate] - 0 - 4 3
Set the drv to 3.

Set I59, I60 and I61correctly.

Inverter operation is performed via RS485 communication.

Refer to Chapter. 11. RS485 communication.
