LS SV-iG5H Series, Manual, Page: 93 / 226

79
Basic Functions
B
as
ic
Fu
nc
tio
ns
7.3 Operating command setting method
Operation via keypad RUN key and STOP/RST key 7.3.1
Group Code Parameter Name Setting Range Default Unit
Drive group
drv [Drive mode] 0 0 - 4 1
drC
[Direction of motor rotation
select]
- F, r F
Set drv
– [Drive mode] to 0. 
Acceleration is started upon pressing the Run key while operating frequency is set.

Motor decelerates to stop by pressing the STOP/RST key.
Selecting rotation direction is available at drC -

[Direction of motor rotation select] when operating
command is issued via keypad.
drC
[Direction of motor
rotation select] F Forward
r Reverse
►
When remote keypad is connected, body-embedded
keypad is deactivated.
Operating command via FX, RX terminal 1 7.3.2
Group Code Parameter Name Setting Range Default Unit
Drive group drv [Drive mode] 1 0 - 4 1
I/O group
I17
[Multi-function input
terminal P1 define]
0 0 - 30 0
I18
[Multi-function input
terminal P2 define]
1 0 - 30 1
Set drv
– [Drive mode] to 1. 
Set I17 and I18 to 0 and 1 to use P1 and P2 as FX and RX terminals.

“FX” is Forward run command and “RX” Reverse run. 
►
Motor is stopped when FX/RX terminal is
ON/OFF at the same time.