LS SV-iG5H Series, Manual, Page: 90 / 226

Basic Functions
76
Group Code Parameter Name Setting Unit
I/O group
I 2 [NV input Min voltage] 0 V
I 3 [Frequency corresponding to I 2] 0.00 Hz
I 4 [NV input Max voltage] 10.00 V
I 5 [Frequency corresponding to I 4] 5.00 Hz
I7 [V1 input Min voltage] 0.00 V
I 8 [Frequency corresponding to I 7] 0.00 Hz
I 9 [V1 input max voltage] 10.00 V
I10 [Frequency corresponding to I 9] 5.00 Hz
I12 [I input minimum current] 4.00 mA
I13 [Frequency corresponding to I 12] 0.00 Hz
I14 [I input max current] 20.00 mA
I15 [Frequency corresponding to I 14] 60.00 Hz
After the above setting is made, if 5V is applied to V1 with 12mA given to terminal I,

output frequency would be 32.5Hz. If
–5V is applied to V1 terminal with 12mA given to
terminal I, output frequency would be 27.5Hz.
Frequency setting via 0 - 10[V] + 0 - 20[mA] input 7.1.7
Group Code Parameter Name Setting Range Default Unit
Drive group
0.00 [Frequency Command] - 0 -400 0.00 Hz
Frq [Frequency Mode] 6 0 - 8 0
Select 6 in Frq code of Drive group.

Related code: I 6 - I 10, I 11 - I 15

Refer to Frequency setting via -10 - +10V voltage input + 0 - 20mA input.

Frequency setting via RS 485 communication 7.1.8
Group Code Parameter Name Setting Range Default Unit
Drive group
0.0 [Frequency Command] - 0 -400 0.00 Hz
Frq [Frequency Mode] 7 0 - 8 0
Select 7 in Frq code of Drive group.

Related code: I 59, I 60, I 61

Refer to Chapter 11. RS485 communication.
