LS SV-iG5H Series, Manual, Page: 87 / 226

73
Basic Functions
B
as
ic
Fu
nc
tio
ns
Frequency setting via
–10 - +10[V] input
7.1.3
Group Code Parameter Name Setting Range Default Unit
Drive group
0.00 [Frequency Command] - 0 -400 0.00 Hz
Frq [Frequency Mode] 2 0 - 8 0
I/O group
I 2 [NV input minimum voltage] - 0 - -10 0.0 V
I 3
[Frequency corresponding to
I2]
- 0 - 400 0.00 Hz
I 4 [NV input max voltage] - 0 - 10 10.00 V
I 5
[Frequency corresponding to
I4]
- 0 - 400 60.00 Hz
I6 - I10 [V1 input]
Set Frq
– [Frequency Mode] to 2.

The set frequency can be monitored in 0.00 - [Frequency Command].

►
Apply
–10V - +10V signal between V1 and CM terminal.
►
Output frequency corresponding to
–10V - +10V input voltage to V1 terminal
►
I 2 - I 5: Setting input range and corresponding frequency to -10V - 0V V1 input voltage
Ex) when minimum (-) input voltage is -2V with corresponding frequency 10Hz and Max
voltage is
–8V with run freq. 50Hz.