LS SV-iG5H Series, Manual, Page: 86 / 226

Basic Functions
72
7 Basic Functions
7.1 Frequency mode
Keypad Frequency setting 1
7.1.1
Group Code Parameter Name Setting Range Default Unit
Drive group
0.00 [Frequency Command] - 0 - 400 0.00 Hz
Frq [Frequency mode] 0 0 - 8 0
Set Frq
– [Frequency mode] to 0 {Frequency setting via Keypad 1}. 
Set the desired frequency in 0.00 and press the Prog/Ent (

) key to enter the value into

memory.
The value is settable less than F21
– [Max frequency]. 
►
When remote keypad is connected, keypad keys on the body are deactivated.
Keypad Frequency setting 2 7.1.2
Group Code Parameter Name Setting Range Default Unit
Drive group
0.00 [Frequency Command] - 0 - 400 0.00 Hz
Frq [Frequency mode] 1 0 - 8 0
Set Frq
– [Frequency mode] to 1{Frequency setting via Keypad 2}. 
In 0.00 , frequency is changed upon pressing the Up (

)/Down (

) key. In this case,

UP/Down keys serve as a potentiometer.
The value is settable less than F21
– [Max frequency]. 
►
When remote keypad is connected, keypad keys on the body are deactivated.