LS tractor I3030 Operator'S Manual Download

Page: 42 / 104

TROUBLE SHOOTING

Cylinder rod packing set
leakage.

Check cylinders for leakage. Repair as needed.

External hydraulic fluid
leakage.

Control valve o-rings
defective.

Replace defective o-rings.

Control valve spool or body
damaged or worn.

Replace control valve.

Disassemble valve for inspection and repair.

Control valve spool(s) will
not return to centered
position.

Loose hydraulic connection.

Defective hydraulic hose,
tubeline, adapter fitting or
adapter fitting o-ring.

Tighten loose connections.

Check for origin of oil leak and replace defective
part.

Control lever linkage binding. Determine origin of binding and repair.

Control valve spool centering
is broken.

Replace centering spring.

Check cylinders for leakage.

Control valve internal leakage.

Note: A gradual drop over
an extended period of time
is a normal condition.

Replace control valve and recheck.

System relief valve squeals.

Backhoe drops with control
valve spool in "centered"
position (no external oil
leakage evident.)

Cylinder piston assembly
leakage.

Control valve spool binding
in valve body spool bore.

Relief valve setting below
specifications.

Check and reset valve setting as needed.

Hydraulic hose, tubeline or
quick disconnect coupler
restriction.

Check for evidence of restriction in hydraulic oil
flow. Repair or replace defective components.

Hydraulic Oil viscosity too
heavy or Incorrect oil

Check oil number and viscosity, Refill correct
hydraulic oil.

Excessive load in bucket.
Weight exceeds specified
backhoe capacity.

Reduce load.

PROBLEM

POSSIBLE CAUSE

CORRECTION

- 41 -

Summary of Contents for I3030









































































































Search results

Summary of Contents for I3030

Reviews:

Related manuals for I3030

Brands by name

Popular brands

LS tractor I3030, Operator'S Manual

Search results

Summary of Contents for I3030

Reviews:

Related manuals for I3030

Brands by name

Popular brands