3-3. Hydraulic system
(1) Steering system
As the steering system of your tractor has a hydraulic pump, valve and etc., it provides you more
convenience to operate the steering wheel.
Notices when using the steering system.
1. If there is too much of a load in front loader bucket, it could be difficult to operate the steering wheel.
In this case, reduce the size of the load.
2. After turning the steering wheel fully, do not turn the steering wheel to the same direction again. As
the unnecessary force is applied, this could damage to the steering system. Especially, DO NOT
operate the steering wheel excessively. if the front wheel mired in a ditch, the rim could be affected
and damaged.
3. If it sounds abnormal when operating the steering wheel, this means that there is some air in the
(2) Hydraulic lift control
Hydraulic lift device can be worked in position control, draft control and mixed control mode.
▶
If the engine stops, the steering wheel does not turn easily because hydraulic pump
does not work. But this is not a pump failure.
▶
If you turn the steering wheel while driving, the steering wheel does not return back
automatically.
Notice
steering components and line. In this case, turn the steering wheel to the left and right fully and hold
it for about 5 seconds to bleed out air in the hydraulic system. If abnormal noise does not stop,
contact your authorized dealer for repair.
4. When starting engine in cold weather, a abnormal noise may occur. In this case, warm up the tractor
before using to reduce the oil viscosity.
5. If you use the tractor for a long time while turning the steering wheel fully, the oil temperature will
increase which may cause the reduction of the product life or the failure of hydraulic and steering
system.
3
3
3
3
- 16
Remote control lever
(if fitted)
Position control lever
Down speed control knob