LS ELECTRIC SV-iS7 Series, User Manual

Page: 316 / 491

M
oni
to
r
Func
tio
ns
299
Using Monitor Functions
9 Using Monitor Functions
9.1 Monitoring the Operating Status via the Keypad
You can monitor the operating status using the keypad of the inverter. You can select the
desired items to monitor in Config mode (CNF), view three items at a time in Monitor mode,
and select an item on the status display.
9.1.1 Selecting Monitor Mode Display
Mode Group Code LCD Display Parameter Setting Unit
CNF
- 21 Monitor Line-1 0 Frequency Hz
- 22 Monitor Line-2 2 Output Current A
- 23 Monitor Line-3 3 Output Voltage V
24 Mon Mode Init 0 No -
Monitor Mode Display Selection Details
Code Description
CNF-21 – 23
Monitor Line-x
Select the items to monitor in Monitor mode. Monitor mode is displayed when
the inverter is powered on. Also, all three items in Monitor Line-1
– 3 can be
displayed simultaneously. Select an item for the line to display. If “Yes” is set at
CNF-24 (Mon Mode Init), CNF-21 – 23 will be initialized.
Setting Function
0 Frequency Displays the set frequency while stopped. During
operation, it displays the actual output frequency
(Hz).
1 Speed Displays the set speed (rpm) while stopped. During
operation, it displays the actual operating speed
(rpm).
2 Output Current Displays the output current.
3 Output Voltage Displays the output voltage.
4 Output Power Displays the output power.