LS ELECTRIC SV-iS7 Series, User Manual

Page: 218 / 491

Learning Advanced Features
Adv
anc
ed
Feat
ur
es
201
8.2 Jog Operation
The jog operation allows for temporary control of the inverter. You can enter a jog operation
command using the multi-function terminals.
The jog operation is the second-highest priority operation, after the dwell operation. If a jog
operation is requested while operating the multi-step, up-down, or 3-wire operation modes,
the jog operation overrides all other operation modes.
8.2.1 Jog Operation 1-Forward Jog via Multi-function Terminal
The jog operation is available using the multi-function terminal input. To start a forward jog
operation, an Fx operation command must be entered. The table below lists parameter
settings for a forward jog operation using the multi-function terminal input.
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV
11 Jog frequency JOG Frequency 10.00 0.5 – Max Freq Hz
12
Jog operation
acceleration time
JOG Acc Time 20.00 0.00 – 600.00 sec
13
Jog operation
deceleration time JOG Dec Time
30.00 0.00 – 600.00 sec
IN 65 – 75
Px terminal
configuration
Px Define(Px:
P1
– P8 [optional:
P9 – P11])
6 JOG - -
Forward Jog Details
Code Description
IN-65 – 75 Px Define
Select an input terminal from IN-65 – 75 (P1 – P8 [optional: P9-P11]) and set
it to “6 (Jog) ” .
[Terminal settings for jog operation using the P5 terminal]
DRV-11 JOG Frequency Sets the operation frequency.