LS ELECTRIC SV-iS7 Series, User Manual

Page: 167 / 491

Basic Functions
150
7.1.5 Setting a Frequency with Pulse Input (with an optional
encoder module)
After installing an optional encoder module, you can set a frequency reference by setting DRV-
07 (Frequency reference source
) to “9 (Pulse)” and provid ing a pulse frequency of 0 – 32.00 kHz
to the pulse input terminal.
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV 07
Frequency reference
source
Freq Ref Src 7 Encoder 0 – 9 -
IN 01
Frequency at maximum
analog input Freq at
100%
60.00
0.00 – max.
frequency
Hz
APO
01 Encoder option mode
Enc Opt
Mode
2 Reference 0-2 -
04 Encoder type selection Enc Type Sel 0 - 0-2 -
05 Encoder pulse selection
Enc Pulse
Sel
2 A 0-2 -
06 Encoder pulse number
Enc Pulse
Num
- 10-5000 -
09 Pulse input display
Pulse
Monitor
- - kHz
10
Encoder filter time
constant
Enc Filter 10 0-10000 ms
93 Minimum pulse input Enc Pulse x1 0.0 0-100 kHz
94
Minimum pulse
Output%
Enc Perc Y1 0.00 0-100 %
95 Maximum pulse input Enc Pulse x2 100.0 0-200 kHz
96
Maximum pulse
Output%
Enc Perc y2 100.00 0-100 %
* Quantizing is disabled if “0” is selected.