LS ELECTRIC LSLV-H100 Series, User Manual

Page: 261 / 618

248
Learning Advanced Features
Code Description
CNF-51 View Lock Pw
Register a password to allow access to parameter view lock. Follow
the steps below to register a password.
No Procedure
1 [PROG/ENT] key on CNF-51 code will show the previous
password input window. If registration is made for the first
time, enter ‘0.’ It is the factory default.
2 If a password had been set, enter the saved password.
3 If the entered password matches the saved password, a
new window prompting the user to enter a new password
will be displayed (the process will not progress to the next
stage until the user enters a valid password).
4 Register a new password.
5 After registration, code CNF-51 will be displayed.
CNF-50 View Lock Set
To enable parameter view lock, enter a registered password. The
[Locked] sign will be displayed on the screen to indicate that
parameter view lock is enabled. To disable parameter view lock, re-
enter the password. The [locked] sign will disappear.
5.37 Parameter Lock
Use parameter lock to prevent unauthorized modification of parameter settings. To enable
parameter lock, register and enter a user password first.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF
52 Parameter lock Key Lock Set Un-locked 0
–9999
-
53
Parameter lock
password
Key Lock Pw Password 0
–9999
-
Parameter Lock Setting Details