LS ELECTRIC LSLV-H100 Series, User Manual

Page: 106 / 618

93
Learning Basic Features
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
voltage V
15
V1 output at
maximum voltage
(%)
V1- Perc y2 -100.00
-100.00
–
0.00%
%
Rotational Directions for Different Voltage Inputs
Command /
Voltage Input
Input voltage
0
–10 V
-10
–0 V
FWD Forward Reverse
REV Reverse Forward
-10
–10 V Voltage Input Setting Details
Code Description
IN-12 V1- volt
x1
–
IN-15 V1- Perc
y2
Sets the gradient level and off-set value of the output frequency in relation
to the input voltage. These codes are displayed only when IN-
06 is set to ‘1
(bipolar)’.
As an example, if the minimum input voltage (at V1) is set to -2 (V) with
10% output ratio, and the maximum voltage is set to -8 (V) with 80% output
ratio respectively, the output frequency will vary within the range of 6
–48
Hz.
For details about the 0
–+10 V analog inputs, refer to the code descriptions
IN-08 V1 volt x1
–IN-11 V1 Perc y2 on page
89 .