MultiController E 0-100%
Side 4
LS Control A/S
2 Functions
2.1
User Interface
The display is operated by push-buttons.
The general function of each button is described below.
Shortcuts are available in the main window. They are indicated
By an icon above each button
Icon
Function
ON/OFF
Increase adjusted level / one step up
Decrease adjusted level / one step down
Go to menu
2.2
Main Window
In the main window the current output level and icons of enabled functions (scheduler and Modbus) are displayed.
The icons at the bottom of the display indicates function of the buttons and if the functions ‘prolonged operation’
and/or ‘PIR’ are enabled.
ON/OFF and 0-100%
4-Step
Fig.1
A)
By pressing ”arrow up” the level of output signal is increased / or stepped up by one.
B)
By pressing ”arrow down” the level of output signal is decreased / or stepped down by one.
C)
By pressing ”ON/OFF” output signal shifts between turned on and turned off.
D)
By pressing ”menu” The display changes to main menu.
E)
Icon indicating that Modbus communication is enabled.
F)
Icon showing that the output signal is adjusted in percentage / figure step 1 to 4
G)
Icon indicating if scheduler function is enabled.
H)
Level of the current output signal.
I)
Display of time and, if applicable, plant name /alarm
J)
Display of minutes for prolonged operation, if enabled.
K)
Icon indicating that PIR (motion sensor) operation is enabled.
Icon
Function
Choose / Enter
Increase / one step up
Decrease / on step down
ESC
Escape / cancel
21:27
VU 0124
I
H
G
F
E
A
B
C
D
001
J
65
K
N
%
21:27
VU 0124
1
