First startup
ProtoMat S64/S104
48/54
LPKF Laser & Electronics AG | V. 1.0
5.4.6 Connecting the PC to the mains power supply
The PC is connected to the mains power supply using a mains cable.
Material
The following material is required:
Fig. 39: Mains cable
Connecting the mains cable
CAUTION! Tripping hazard by hoses and cables!
Hoses and cables are routed to the system. If the hoses and cables are laid
inappropriately they pose a tripping hazard for the operating personnel.
Always ensure that the hoses and cables do not pose a tripping hazard.
1. Connect the mains cable to the PC.
2. Connect the mains cable to the earthed wall socket.
The mains cable has been connected.
5.4.7 Dummy tool
The system is equipped with a dummy tool for transport. It is in the collet and
must
not
be removed manually! Once the system and the corresponding software are ready
for operation, the dummy tool is ejected automatically when a processing job is
started.
Fig. 40: Dummy tool
