Maintenace ProtoMat S-Serie
5 / 9
2. Maintenance of the Z axis guide:
Tools required:
none
Maintenance kit Art-Nr.
126891 für S100,
126892 für S42/S62
Accessory pack ProtoMat Supplied as standard
Required:
Machine oil
•
Run the head of the miller into the middle of the operating area, and stop the BoardMaster.
Do not run the machine to the reference point.
•
Switch of the machine and use your hand to press the milling head approx. 50 mm downwards - you will
feel a slight resistance.
•
The two guides for the Z axis can now be seen to the left and right, behind the motor spindle (red marked
areas). This picture shows the PM S100 with the camera option.
