L-IP User Manual
59
LOYTEC
Version 6.1
LOYTEC electronics GmbH
Figure 48: Device Information Page.
The device information page shows some general information about the device in the
General Info
section. This includes the product model and the current firmware version.
Below, it shows important operational parameters, such as free memory, CPU load, system
temperature and supply voltage, time synchronization status and system uptime.
The
Device Status
section summarizes the status of the various ports and protocols on the
device. The summary status is displayed as a green OK checkmark. If any of the interfaces,
protocols or operational parameters are non-normal, a warning or error sign is shown
instead. Shown below are further a summary on the active protocols on the respective ports.
All items are links that lead directly to their configuration page.
Below the general status information more specific sections are displayed depending on the
model. The
Firmware Info
provides version and build times of the primary and fallback
firmware images installed on the device.
The page also includes the unique node IDs (“Neuron IDs”) of the CEA-709 network
interfaces. The multi-port L-IP displays the external node IDs as well as the node IDs for
the internal backbone in separate. This page can also be used to send the CEA-709 service
pin messages. This is a useful feature when commissioning the device, since it is not
necessary to be on-site to press the status button.
Click through the menus on the left hand side to become familiar with the different screens.
If you click on
Config
in the left menu, you will be asked to enter the administrator
password in order to make changes to the settings as shown in Figure 49. Enter the default
administrator password ‘loytec4u’ and select
Login
. Note, that firmware versions previous
to 4.0 used ‘admin’ as the default password.