L-INX User Manual
159
LOYTEC
Version 4.0
LOYTEC electronics GmbH
Figure 140: Configure E-Mail Template Dialog.
4.
Enter text in the
E-mail Text
multi-line field.
5.
If the e-mail text shall contain values of data points, add data points to the
Data
Sources
list by clicking the
Add…
button.
6.
A data point selector dialog opens. Select one or more data points and click
OK
. The
selected data point appears in the
Data Sources
list.
7.
Select the data point in the
Data Sources
list. In the drop-down box underneath select
Selected Data Source Value
and click the
Paste to Text
button.
8.
A place holder
%{v1}
for the data point value appears now in the e-mail text.
9.
To replace an existing data source select the data point in the
Data Sources
list and
click the
Replace…
button. This opens a data point selector dialog for choosing the
replacement data point.
6.11.2 Trigger E-mails
E-mail templates are used to assemble and transmit e-mails when certain trigger conditions
occur. For an e-mail template, one or more trigger conditions can be defined. The e-mail
will be sent, when one of the trigger conditions is activated. Depending of the trigger data
point type, the trigger conditions can be refined.