21
Pages
To edit gauge display:
Use the keypad to select the gauge you want to
1.
edit and press
enTeR
. The Select Data menu
will appear.
Use the keypad to select a data category and press
2.
enTeR
. A list of subcategories will appear.
Select the desired subcategory and press
3.
enTeR
.
Press
4.
MenU
. The Edit Data menu will appear.
Highlight
5.
Finish Edit
and press
enTeR
. The
Finish Edit Data menu will appear.
Highlight the
6.
Save
button and press
enTeR
.
Edit Data menu
Changes Info Page gauge data, allowing you to display desired data on analog ,
digital and bar gauges. It also controls gauge limits.
To access the Edit Data menu, switch the screen to Edit mode and press
MenU
.
GPS category
Ground Speed
subcategory
NOTE:
Press
enTeR
or
exIT
to switch gauges into Edit Mode
to Normal Mode.
Editing data on an analog
gauge
Editing data on a digital gauge
NOTE:
Select Data, Add Source and Configure Limits are
described in more detail in the previous Data Overlay segment.
