14
Pages
Edit Mode
When a gauge is added to the display it will be shown in edit mode. Analog and
bar gauges are shaded in blue when they are in Edit Mode. Digital Gauges will be
shown with a blue border.
Move or Placing a Gauge
The Move gauge command allows you to move data overlay to any position on the
screen. When you use the Place gauge command, the gauge will be locked in its
current position.
To move or place a gauge:
Press the
1.
enTeR
key when the gauge is in Edit
mode. Four directional arrows will appear when
the gauge can be moved.
Use the keypad to move the gauge to a desired
2.
location on the screen.
Press
3.
enTeR
to place the gauge.
Select Data
Used to select data that will be shown on the data overlay display. When selecting
data you first will open a main data category and then choose data to be displayed
from the a data subcategory.
Analog gauge in edit
mode
Digital gauge in edit mode
