111
Settings
Serial Ports
Configures communication ports to send or receive data with another electronic
device, like an autopilot.
To configure serial ports:
Highlight
1.
Serial Ports
on the Network menu
and press
enTeR
. The Serial Settings
menu will appear.
Select the desired setting (Protocol,
2.
Communication Port 1 or Communication
Port 2) and press
enTeR
.
Use the keypad to select the desired option
3.
and press
enTeR
.
Highlight
4.
OK
and press
enTeR
.
NMEA 0183 Output
Controls NMEA 0183 sentences used, allowing you to select the type of messages
your unit will transmit when communicating with other NMEA 0183 devices. The
default setting will work well under most conditions.
To access NMEA 0183 Output screen:
1. Select
NMEA 0183 Output
from the
Network menu and press
enTeR
.
Highlight a desired sentence and
2.
press
enTeR
to turn it on/off.
To finalize changes, select
3.
OK
and
press
enTeR
.
NMEA 0183 Output screen
Serial settings menu
