1
Pub. 988-0154-471
EP-35 Temp
Electronic Temperature Sensor
Installation Instructions
This instruction sheet tells how to install your EP-35 temp sensor and
connect it to a NMEA 2000
network using LowranceNET
network
components. You must refer to your digital gauge, sonar or GPS unit's
manual for sensor operation instructions.
Caution:
Installing LowranceNET NMEA 2000 devices is
significantly
different
from installing earlier Lowrance components without
NMEA 2000 features. You should read all of the installation
instructions before proceeding. You should decide where to
install all components before drilling any holes in your vessel.
Some sonar or GPS units may require a software upgrade to display
NMEA 2000 data correctly and a manual addendum describing how to
operate the sensor. You can download these free and get additional
information on the NMEA 2000
compatible LowranceNET
system at
our web site,
www.lowrance.com
.
All Lowrance NMEA 2000 capable devices are either NMEA 2000
certified or certification is pending. See our web site for the latest
product status information.
The EP-35 temperature sensor.
The EP-35 consists of the temp sensor module, a blue female locking
cable connector and the smart module, which converts analog
Temp module
Smart module
Blue female NMEA
2000 connector
Summary of Contents for EP-35
Page 6: ...6 Notes...
