Chapter
6
Operation
Neonate configuration
LM 2000 - 06.05.2021 - 09382-03
33
The Reset button resets the parameter to the factory
setting.
Pressing the [Back] button returns you to the list of
adjustable parameters.
Press the [OK] button to save the changes made to
the selected parameter.
The LM 2000 memorises the changes made. After all
desired parameters have been changed, press [OK]
in the parameter overview to save the changes.
N – Screen saver
The screen saver is activated when the LM 2000 is
left in operation for a certain period of time
(adjustable via the settings menu) without touching
the screen.
The temperature displayed on the black
background is the value measured by the
temperature sensor near the patient.
Tap the screen to exit the screen saver and return to
the operating screen.
The screen saver is automatically disabled when an
alarm state is triggered.
N – Alarm screen
The LM 2000 has an alarm system that can indicate
a potential or actual danger and emit visual and
audible warning signals.
The visual alarm signal ensures that the adjacent
button is displayed on the operating screen in the
event of an alarm.
One or two buttons with the symbols for the type of
detected alarm state are also displayed.
For a complete description of the causes of activation
and possible solutions to the alarm states, see
chapter (→
The indicator that appears on the screen of the
humidification system makes it easier to locate the
source of the danger that triggered the alarm.
When an alarm signal is triggered, a danger symbol
is displayed on the screen:
For second-level alarms, the alarm icon is yellow.
