Chapter
4
Configuration Service
Neonate configuration
LM 2000 - 06.05.2021 - 09382-03
23
Neonate configuration
N
Patient hazard - Incorrect positioning of temperature sensor
Positioning the temperature sensor inside the incubator or within the
effective range of the radiation plate will affect the correct operation of the
humidifier.
▪
Position the temperature sensor near the patient on the outside of the
incubator or outside the effective range of the radiation plate.
WARNING
Graphic display of the humidification system with
heated inspiration and expiration tubes. The arrows
indicate the direction of gas flow, with the ventilator
represented by block “V”, the humidifier by block “U”
and the patient by block “P”.
(1)
Water chamber
(2)
Temperature sensor cable
(3)
Temperature sensor at the outlet of the
water chamber
(4)
Sensor to detect the temperature near
the patient
(5)
Inspiration tube
(6)
Expiration tube
(7)
Connecting tube to the ventilator
(8)
Dual heating cable
(9)
Connection to the internal heating cable of the
inspiration circuit
(10)
Connection to the internal heating cable of the
expiration circuit
(11)
Incubator tube
(12)
Patient interface (nasal cannula or tracheal
tube)
Graphic display of the humidification system with
heated inspiration tube. The arrows indicate the
direction of gas flow, with the ventilator represented
by block “V”, the humidifier by block “U” and the
patient by block “P”.
(1) Water trap
(2)
Single heating cable
For further positions, refer to the illustration above.
