Lovibond Tintometer XD 7500, Quick Start Manual

Page: 10 / 164

EN
10
ba77195y01 09/2017
English XD 7500
3.2.2 Connecting the power supply
CAUTION
The line voltage of the usage location must fulfill the specifications
stated on the power pack (the specifications are also given in Chapter 8
T
ECHNICAL DATA
). Always use the supplied 12 V original power pack
only.
Before plugging in the power cable check whether it is undamaged.
If the power cable is damaged, the instrument must not be operated.
Connect the
power pack
1 Turn the photometer upside down
and place it on a soft surface.
2 Open the lid of the battery
compartment (1).
3 Insert the four batteries in
the battery compartment.
The ± indicators in the battery
compartment must match the
± indicators on the batteries.
4 Close the lid of the battery
compartment.
1
1 Connect the miniplug of the power
pack to the socket (1) of the
photometer.
2 Connect the power pack to an
easily accessible power outlet.
1