Lovibond PoolDirect, Instruction And Operation Manual, Page: 41 / 78

41
PoolDirect 9in1_4i 11/2015
2.3.5 Performing Tests
When zero calibration is complete, remove the vial from the sample chamber and perform
the tests as described under "Method".
When the results have been displayed:
• with some methods you can change between different chemical species
• you can store and/or print out the results
• perform further analysis with the same zero
• select a new method
2.3.6 Ensuring reaction periods (countdown)
To ensure compliance with reaction periods there is incorporated a time delay, the
countdown.
• Press [TEST] key.
Prepare the water sample/blank as described in the
method description and place the vial in the sample
chamber. The display shows the countdown by
pressing the [TEST] key and the countdown is
started automatically. After the reaction period is
finished the reading starts automatically.
Notes:
1. It is possible to finish the working countdown by pressing the [ ] key. Reading starts immediately.
In this case the operator is responsible for ensuring the necessary reaction period by himself.
Non-compliance with reaction periods leads to incorrect test results.
2. The time remaining is displayed continuously.
The beeper indicates the last 10 seconds.
2.3.7 blank because of technical requirements
Test
Countdown
1:59