55
MD200_8 07/2016
Operating messages
Measuring range exceeded or excessive turbidity.
Result below the lowest limit of the measuring range.
Replace batteries, no further tests possible.
Battery capacity is too low for the display backlight;
measurement is still possible.
A user calibrated method is indicated by an arrow while the test result
is displayed (see "Factory calibration reset").
Error codes
Light absorption too great. Reasons: e.g. dirty optics.
Calibration factor "out of range"
Too much light reaching the detector.
Too much light reaching the detector.
Battery capacity was too low during measurement. Change battery.
CL 6: Factory calibration incorrect / erased
CL 6: User calibration incorrect / erased
CL 10: Factory calibration incorrect / erased
CL 10: User calibration incorrect / erased
pH:
Factory calibration incorrect / erased
pH:
User calibration incorrect / erased
CyA:
Factory calibration incorrect / erased
CyA:
User calibration incorrect / erased
tA:
Factory calibration incorrect / erased
tA:
User calibration incorrect / erased
CAH: Factory calibration incorrect / erased
CAH: User calibration incorrect / erased
Hı
Lo
E 10 / E 11
E 22
btLo
GB
Operating messages – Error codes
Time Cal
Store Date
RESULT
Cal
E27 / E28 / E29
E23 / E24 / E25
E 20 / E 21
E 70
E 71
E 72
E 73
E 76
E 77
E 78
E 79
E 80
E 81
E 82
E 83
Summary of Contents for MD200
Page 23: ...23 MD200_8 07 2016 DE Methoden ...
Page 49: ...49 MD200_8 07 2016 GB Methods ...