manualshive.com logo in svg

Lovibond Maxi Direct, Instruction Manual, Page: 257 / 268

Share
Download
Lovibond Maxi Direct Instruction Manual Download Page 257

255

MaxiDirect_2c   03/2010

2.5 Data transfer

To  print  data  or  to  transmit  to  a  PC  the  optional  IRIM  (Infra-Red  Interface  Module)  is 
required.

2.5.1 Data Printing

Besides the IRIM module the following printer is required to print data directly using the USB 
Interface of the module: HP Deskjet 6940.

2.5.2 Data transfer to a personal computer

Besides the IRIM a transfer program, is required to transmit test results.
Please find detailed information in the IRIM manual or at our homepage in the download-
area.

2.5.3 Internet Updates

To connect the instrument to the serial interface of a computer the optional connection 
cable with integrated electronic system is required.

 

It is possible to update new software applications and additional languages via the 
internet. Please find detailed information at our homepage in the download-area (as soon 
as available).
How to open and close the battery compartment cover see chapter 2.1.3!

Please Note:

To prevent loss of stored test results store or print them out before performing an Update. 

If the update procedure is interrupted (eg. interruption of connection, LoBat., etc.) the 
instrument isn´t able to work (no display). The instrument will only work again after 
completing the data transfer.

A

A

/LR

6

AA

/L

R6

AA

/L

R6

AA

/L

R6

RJ 45 connector

Summary of Contents for Maxi Direct













































































































































































































































































Reviews:

No comments