20
BD 600_GB_1 08/2015
5.6.5 Language
The desired language can be set here. The change does not take effect until function key F2 (adopt)
is pressed.
5.6.6 Date / Time
ATTENTION. Date and time should not be changed before all measurement series have been
completed. Otherwise, the measurement series does not progress correctly under certain
circumstances.
A dedicated submenu is provided to change the date and
time (Figure 16).
The four arrow keys and number keys 0 to 9 are used in
this case. The changes can be adopted with function key F2
(save). You can reach the ‚Options‘ menu with function key
F1 (cancel) without adopting the changes.
5.6.7 Date (format)
The date format of the header and the ‚Date/time‘ submenu
is adjusted with this menu item. The following variants are
possible:
- TT.MM.JJJJ / 31.12.2014
- MM.TT.JJJJ / 12.31.2014
- JJJJ.MM.TT / 2014.12.31
5.6.8 Time (format)
The time format of the header and the ‚Date/time‘ submenu is adjusted with this menu item. The
following variants are possible:
- 12h
- 24h
Figure 16
Figure 17