20
Troubleshooting
Function Code Why This Happens
Solution
Booster Cartridge is
Expired
Pump current.
Voltage Signal
Internal diagnostic
message detected.
Unplug the unit from the power outlet
Remove the old Booster Cartridge by lifting
up and away from the unit. Remove the new
Booster Cartridge from the plastic bag.
Slide the new Booster Cartridge into place
and apply slight pressure to ensure a snug
fit. Plug in your lotus® unit. Press and
hold the Attachment Selector Button for
approximately 3 seconds. The unit will
beep and the Replace Filter Indicator light
will extinguish. The unit is ready for use
Reset the unit by unplugging from the power
outlet. Let the lotus® sit for 5 minutes. Fill
the attachment to the max fill line. Place on
the unit and press the Start/Cancel/Reset
Button.
Reset the unit by unplugging from the power
outlet. Let the lotus® sit for 5 minutes. Fill
the attachment to the max fill line. Place on
the unit and press the Start/Cancel/Reset
Button.
Your lotus® Sanitizing System is
equipped with a sophisticated processor to
continuously monitor the performance of
its internal electronics and ensure that your
unit is running at maximum efficiency.
Please contact the lotus® Customer Care
Department (1-800-808-1724) for the
interpretation of this code in the unlikely
event that it occurs.
(Solid)
F6
F7
All Other
“F”
Codes
If none of the above offered solutions resolves your particular situation, please
feel free to call your lotus® Customer Care Department at 1-800-808-1724,
and speak with a representative who will be more than happy to assist you.
