15
Caring for your lotus
®
Sanitizing System
Your lotus® Sanitizing System is self-cleansing and as such caring for your
new system has never been easier. As your attachments cleanse themselves
every time you generate Oxyshield® activated water, you never have to
clean them. However, if you wish to give any attachments an additional
cleaning, feel free to do so by placing them on the top drawer of your
dishwasher or hand wash with a mild soap and warm water.
Always unplug your lotus® Sanitizing System prior to cleaning.
Only a damp cloth should be used to wipe down your unit.
Never immerse your lotus® Sanitizing System in water or any other
liquid for cleaning.
Never use abrasives, detergents or strong cleaning chemicals.
Replacing your Booster Cartridge allows you to maximize the sanitizing
power of your unit by removing the moisture from the air. All lotus
Sanitizing systems have been designed to work effectively at any humidity.
However, the Booster Cartridge removes excess humidity in the air allowing
the lotus to safely infuse even more super-oxygen into the water. It is the
super-oxygen that strengthens the sanitizing force of your lotus®.
The Booster Cartridge must be replaced approximately every 90 cycles.
If the Replace Filter Indicator icon is flashing during processing, then
there are approximately 10 cycles left before the Booster Cartridge must
be replaced.
If the Replace Filter Indicator icon is solid, then the Booster Cartridge
must be replaced. It is necessary to reset the filter once the new Booster
Cartridge is installed.
Please follow the instructions on page 16 on how to safely replace your
Booster Cartridge and reset the Filter Indicator.
Replacing your lotus
®
Booster Cartridge
