P
lug in the lotus® Sanitizing System.
Fill the Spray Bottle to the max fill line with cold tap
water and screw the top back on. Water must be cold
and not just room temperature.
Place the Spray Bottle onto the docking portal and
firmly push down.
Press the Attachment Selector Button to choose the
symbol on your Display that matches the one found on
the top of your Spray Nozzle (wavy lines). Pressing the
Attachment Selector Button toggles between the two
symbols on the Display
.
Press the Start/Cancel/Reset Button to initiate the
process and cause the water to circulate through the
main base unit and be activated by patented Oxyshield®
technology.
5
Using the Spray Bottle
NOTE:
The direction the Spray
Bottle is facing doesn’t matter.
1
2
3
Max-Fill
1.
2.
3.
4.
5.
NOTE:
Do not tilt base upside down.
The water in the blue reservoir is
perfectly normal and should not be
drained unless unit is being shipped.
CAUTION:
Do not remove
the attachment until the cycle
is complete. Removal of the attachment
during processing could damage the unit.
4
5
