Lotus EMIRA 2022, Owner'S Handbook Manual

Page: 137 / 252

137
Seat/Door Mirror Memory Switches
Memory buttons are located on the
driver’s door panel for vehicles fitted
with power seats. The memory function
can store two different settings for the
driver seat and door mirrors.
Storing Memory Settings
To store a seat/door mirror position in
memory button 1:
– Set the vehicle to ignition 1, or have
the engine running, see page 153.
– Adjust the seat and door mirrors to
the desired position, see pages 136
and 126 .
– Press the M button and release.
The indicator light in the button will
illuminate.
– Within a short period, press and hold
button 1 until the indicator light in the
M button extinguishes and a chime
is heard.
N
NOTE: Use Button 2 in the same
way to store another set of seat/
mirror positions.
Activating a Stored Setting
With the driver door open:
Press button 1 and release. The seat/
door mirrors will automatically move to
the stored position.
With the driver door closed:
Press and hold button 1 until the seat/
door mirrors stop moving.
WARNING: Do not use the mem-
ory function or adjust the seat
when the vehicle is moving. This
could cause loss of vehicle control.
WARNING: The driver’s seat can
be adjusted with the ignition in
mode 0, therefore children should
never be left unattended in the
vehicle.
CAUTION: Obstructions to the
seats movement could cause
damage to the seat.
N
NOTE: The lumbar position setting
is not stored.
SEATS AND STEERING WHEEL