Lotus ATS-1000, User Manual

Page: 13 / 30

13
NOZZLE CLEANING (Automatic)
NOZZLE CLEANING (Manual)
Installation Manual and Operating Instructions
MASSAGE (Rhythm Wash)
In using “WASH” or “LADY” mode, pressing “MASSAGE“button will provide pulsating
spray. In addition, the water pressure can be adjusted by pushing "( ) High or ( )
Low" and "MASSAGE", simultaneously.
* Auto-Setting of Massage
: Without occupying the seat, press “MASSAGE” button for 3 seconds to set up Auto-Setting of
“MASSAGE”. After set up the “MASSAGE” function will operate Automatically in CLEANSING mode.
- If you press “MASSAGE” button for 3 seconds again,the Auto-
Setting of MASSAGE will stop.
ENERGY SAVER (Energy Save Mode)
- The ENERGY SAVER is not on when the LED light is off.
- Press button once to choose “ENERGY SAVE 1”
- Press button again to choose “ENERGY SAVE 2”.
- Press button the third time to turn “ENERGY SAVER” off.
* ENERGY SAVER 1 : the water temperature will be kept at 90°F
* ENERGY SAVER 2(SMART MODE) : the unit will lower the water temperature to 90°F when it is not
being used, and raise the water temperature back to normal level during the time of use. It takes
about four days for the unit to “learn,” and “remember,” the usage pattern of the user(s).
This product has an automatic nozzle self-cleaning function that cleans the
nozzle before and after each use.
Nozzle can be cleaned manually at any time without seat being occupied. Press “WASH
( )” button for 3 seconds and nozzle will come out without Spraying water. After
cleaning the nozzle, Press “STOP( )” button to retract nozzle.
BUZZER SOUND
Occupying the seat Press “OSCILLATE” button for 3 seconds, you can set the
buzzer sound to on or off.
OPER
ATION
907 -908 - 909