Lortone TS10-C Instructions And Parts List Download

Page: 1 / 4

LORTONE, inc • 12130 Cyrus Way, Mukilteo, WA 98275 • Phone: 425-493-1600

5/10

Page 1

TS10-C

InSTruCTIonS and ParTS LIST

(including TS10 Basic)

LorTonE

Trim Saws are high quality saws for trimming slabs to finished configuration.

Cuts cleanly and easily with excellent visibility and has plenty of room for larger slabs.

For use with oil or water coolants. Follow these basic operating and care instructions to

help keep your saw in optimal running condition.

•

Stainless Steel Frame

•

Spacious Work Table

•

Accepts 10” Blade (included with TS10-C)

•

Optional Clear Hood (included with TS10-C)

•

Optional Vise (included with TS10-C)

TS10-C Item # 059-093

TS10 Basic Item # 059-090

LorTonE

Summary of Contents for TS10-C

Page 1: ...ion Cuts cleanly and easily with excellent visibility and has plenty of room for larger slabs For use with oil or water coolants Follow these basic operating and care instructions to help keep your sa...

Page 2: ...ly tighten the set screw on flat of motor shaft Install belt and adjust motor to obtain correct belt tension Do not overtighten the belt as this will lead to excessive noise and premature bearing wear...

Page 3: ...enance however the following should be periodically checked Check belt for wear and proper tension Refer to Motor Installation Check blade for wear and correct alignment Keep blade sharpened by period...

Page 4: ...ld C 059 009 Blade Guard D 059 100 Tank Assembly E 059 101 Trim Table Assembly F 059 102 Belt Guard Assembly G 200 020 Bearing 2 required H 058 028 3 Machined Flange I 205 010 Felt Washer J 211 007 Ar...