8. If you choose to flash the camera’s warning light when a person or vehicle is detected, config-
ure the following warning light options:
•
Duration:
Enter the time in seconds the warning light will remain on after a person or ve-
hicle is detected.
•
Warning Light / Strobe:
Choose
Warning Light
to use a solid white light, or
Strobe
for
a flashing light. If you select
Strobe
, choose the
Strobe Frequency
to determine how
quickly the warning light will flash when triggered.
9. Click
Apply
.
14.3
Searching for Person & Vehicle Detection Events (Smart Search)
Smart Search lets you filter recorded video to search for person detection events, vehicle detection
events, or both.
NOTE
In order to use Smart Search, you must configure at least one channel’s smart detection settings. See the procedure
above for full instructions.
To perform a Smart Search:
1. From the Live View display, right-click to open the Quick Menu, then click
Smart Search
.
2. Select a channel to search for detection events from, or select
All
.
3. Enter a start and end time for your search.
4. Next to
Event Type
, select
Person
,
Vehicle
, or
All
.
#LX400113; r. 3.0/56326/56332; en-US
51