manualshive.com logo in svg

Lorex N881 Series, User Manual, Page: 111 / 136

Share
Download
Lorex N881 Series User Manual Download Page 111

Using the Main Menu

16

5. Click

Import

to restore the system configuration.

6. Click

OK

to confirm. The system will restart to complete the operation.

16.4.24

Restore Default Settings

Restore the system to its default settings.

To restore default settings:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

.

2. Click

, then click

SYSTEM

. Click the

DEFAULT

tab on the side panel.

3. Check the menus you would like to reset to default settings.
4. Click

OK

.

16.4.25

Upgrading Firmware Manually

The primary method for upgrading system firmware is automatically over the Internet. The system
also supports firmware upgrades from a USB thumb drive (not included).

Prerequisite:

•

Save the

.bin

firmware file for your unit onto a USB flash drive (not included), and connect the

drive to one of the system’s free USB ports.

To upgrade firmware manually:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

.

#LX400113; r. 3.0/56326/56332; en-US

103

Summary of Contents for N881 Series









































































































































Reviews:

No comments