Lorex N862 Series User Manual Download Page 73

Page: 73 / 120

Using the Main Menu

To access HDD Info:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

INFORMATION

, then click the

Information

tab on the side panel. Click the

HDD

Info

tab on the top panel.

17.5.3

BPS

Shows bitrates of connected cameras. The bitrate is the amount of data the camera is sending to
the system.

To access the BPS menu:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

INFORMATION

, then click the

Information

tab on the side panel. Click the

BPS

tab on the top panel.

17.5.4

System Log

Search for system logs in a certain time range.

#LX400113; r. 9.0/57191/57191; en-US

Summary of Contents for N862 Series

























































































































Search results

Summary of Contents for N862 Series

Reviews:

Related manuals for N862 Series

Brands by name

Popular brands

Lorex N862 Series, User Manual

Search results

Summary of Contents for N862 Series

Reviews:

Related manuals for N862 Series

Brands by name

Popular brands