To configure snapshot recording settings:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
CAMERA
, then click the
Recording
tab on the side panel. Click the
Snapshot
tab on
the top panel.
3. Under
Snapshot
, select the number of snapshots the system will take when the snapshot but-
ton is pressed.
4. Configure the following settings for snapshots saved automatically from motion detection or
the snapshot schedule:
•
Channel:
Select the channel you would like to configure.
•
Mode:
Select
Timing
for the system to take snapshots at fixed intervals throughout the
day, or select
Trigger
for the system to take snapshots only when triggered by motion de-
tection (snapshot recording must be enabled in the motion detection menu - see 12
•
Image Size:
The image size is the same as the Main Stream resolution of the camera.
•
Image Quality:
Select the snapshot image quality between
1
(lowest) and
6
(highest)
•
Snapshot Frequency:
Enter the time between snapshots in seconds.
5. Click
Apply
to save changes.
17.4.7
Creating Custom Channel Names
You can assign custom names to your cameras. For example, you can name your cameras based
on their location (e.g. hallway or front door).
To create custom channel names:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
CAMERA
, then click the
Channel Name
tab on the side panel.
3. Click a channel to enter a custom name.
#LX400113; r. 9.0/57191/57191; en-US
63
Summary of Contents for N862 Series
Page 1: ...User Manual N862 Series...
Page 2: ......
Page 3: ...User Manual N862 Series LX400113 r 9 0 57191 57191 en US iii...
Page 119: ......
