Lorex N862 Series, User Manual

Page: 67 / 120

Using the Main Menu 17
2. Click DISPLAY , then click the Sequence tab on the side panel.
3. Choose how many channels will appear on screen when Sequence mode is triggered by mo-
tion detection (you must check Sequence when configuring motion detection — see 12 Mo-
tion Detection , page 38for details).
4. Enter the amount of time in seconds that each channel or page will appear on screen during
Sequence mode.
5. Select a viewing mode to configure. It is recommended to start with View 1 and make your
way to
View 9
. By default, all viewing modes are included in the Sequence mode cycle.
6. Configure the order of channels shown on screen for each viewing mode. Uncheck channels
/ channel groups that you want to remove from the Sequence mode cycle.
7. Click Apply .
17.4 Camera Menu
The Camera Menu allows you to manage IP cameras, set recording parameters, and assign cus-
tom titles for your cameras.
17.4.1 Viewing Camera Status
View the connection and alarm status for all connected cameras.
To view camera status:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu .
#LX400113; r. 9.0/57191/57191; en-US 59